Welcome to the Alpine PDX 1.600M resource center. This site is designed to help you quickly and easily find the latest Alpine PDX 1.600M reviews, Alpine PDX 1.600M tutorials, and Alpine PDX 1.600M videos and Alpine PDX 1.600M for sale. The Alpine PDX 1.600M information on this site is updated often, so if you are interested in Alpine PDX 1.600Ms, bookmark this site so you can visit often.

Alpine PDX-1.600M Marine Mono Subwoofer Amplifier

Alpine PDX-1.600M Marine Mono Subwoofer Amplifier

600 watts RMS, 4 ohms, Class D amplifier design, Quick connect speaker connectors, Variable low pass filter, stackable installation design, MOSFET power and output stages Weather-sealed and coated

Alpine MRX-M100 - Monoblock 1000 Watt RMS Subwoofer Amplifier

Alpine's X-Power amplifiers use the latest amp technology to play your music loud and clean without taking up much space. And these amps employ some of the same circuitry developed for Alpine's top-of-the-line PDX digital amps, so they'll bring exceptional sound to almost any ride. The MRX-M100 mono amp puts out up to 1,000 watts RMS to your subwoofer system, so you can fill your listening space with plenty of bass. And it'll operate safely with a 1-ohm load, making it useful in a variety of sub system installations. Onboard low-pass and subsonic filters let you get the best sound out of your setup, while a bass boost helps to fatten up the sound if you need it. A power management system optimizes the amp's performance and keeps the music playing, even when you're pushing it hot and hard for a long time. Speaker-level inputs with an automatic turn-on feature simplify system hook-up.


Alpine Speaker Connector Plug for Alpine PDX Series Amplifiers




Alpine PDX-M6 Mono Power Density Digital Amplifier

Alpine packs Class-D amplifier technology into their PDX amplifiers for awesome power from a 2" tall frame. These small-but-mighty amps run so cool they can be stacked together into a single unit - their heatsinks couple together to cool the entire stack. Each amp offers an 8" by 10" footprint, so they'll fit in hatchbacks, trunks, truck cabs, and any vehicles with limited space.


Alpine SPR-17C 6-1/2" 2-Way Speaker (Pair)

2-way coaxial speakers, hybrid layered pulp woofer cone, 300 watts peak power, 1 Inches silk dome tweeter.


Alpine SPR-17S 6-1/2" Component 2-Way Speaker (Pair)

2-way hybrid layered pulp woofer cone, 330 watts peak power, 1" silk dome tweeter, 2-way crossovers


Alpine PDXF6 / PDX-F6 / PDX-F6 4 Channel 150W Car Amplifier

4-channel car amplifier 150 watts RMS x 4 at 4 ohms (150 watts RMS x 4 at 2 ohms) 300 watts RMS x 2 in bridged mode (4-ohm stable in bridged mode) variable high- and low-pass filters (30-400 Hz, 12 dB/octave) Class-D amplifier design stackable installation design with front-panel controls quick-connect speaker and power connectors preamp-level inputs MOSFET power and output stages CEA-2006 compliant fuse rating: 30A x 2 4-gauge power and ground leads recommended wiring and hardware not included with amplifier Dimensions: (WHD) 10-1/8" x 2" x 7-9/16" In. warranty: 1 year


M4300 - JL Audio 4-Channel 300 Watt Marine Audio Amplifier

Description: Class A/B Four-Channel System Amplifier Patented Technology: Absolute Symmetry, Class A/B Circuit (U.S. Patent #6,294,959) Inputs: For superior noise immunity, RCA jack inputs On-board Crossover: State-variable, 12dB / octave Butterworth with continuously variable cutoff frequency selection from 50 - 200 Hz. Configurable as Low-Pass or High-Pass Preamp Output: Pass-through type Bass EQ (Channels 3&4 only): +6 dB fixed frequency, fixed 'Q' (defeatable) with port for optional remote bass control (RBC-1) Speaker output connections: Accept up to 8 AWG wire +12V and Ground connections: Accept up to 4 AWG wire Rated Power 14.4 V Stereo: 70 W RMS x 4 @ 4 ohm / 110 W RMS x 4 @ 2 ohm Rated Power 14.4 V Bridged : 140 W RMS x 2 @ 8 ohm / 220 W RMS x 2 @ 4 ohm Rated Power 12.5 V Stereo: 45W RMS x 4 @ 4 ohm / 75W RMS x 4 @ 2 ohm Rated Power 12.5 V Bridged: 90W RMS x 2 @ 8 ohm / 150W RMS x 2 @ 4 ohm THD at Rated Power: 12.5V: 200 @ 4 ohm per ch. / 50 Hz >100 @ 2 ohm per ch. / 50 Hz Slew Rate: 22V / s Input Range: 200mV - 8V RMS Dimensions (L x W x H): 13.80 in. x 9.25 in. x 2.50 in. / 350 mm x 235 mm x 63.5 mm