Welcome to the Alpine PDX 1.1000 resource center. This site is designed to help you quickly and easily find the latest Alpine PDX 1.1000 reviews, Alpine PDX 1.1000 tutorials, and Alpine PDX 1.1000 videos and Alpine PDX 1.1000 for sale. The Alpine PDX 1.1000 information on this site is updated often, so if you are interested in Alpine PDX 1.1000s, bookmark this site so you can visit often.

12" Alpine Type X - Surgious Halo - EXO - PDX 1.1000

Alpine Speaker Connector Plug for Alpine PDX Series Amplifiers

Alpine MRX-M100 - Monoblock 1000 Watt RMS Subwoofer Amplifier

Alpine's X-Power amplifiers use the latest amp technology to play your music loud and clean without taking up much space. And these amps employ some of the same circuitry developed for Alpine's top-of-the-line PDX digital amps, so they'll bring exceptional sound to almost any ride. The MRX-M100 mono amp puts out up to 1,000 watts RMS to your subwoofer system, so you can fill your listening space with plenty of bass. And it'll operate safely with a 1-ohm load, making it useful in a variety of sub system installations. Onboard low-pass and subsonic filters let you get the best sound out of your setup, while a bass boost helps to fatten up the sound if you need it. A power management system optimizes the amp's performance and keeps the music playing, even when you're pushing it hot and hard for a long time. Speaker-level inputs with an automatic turn-on feature simplify system hook-up.


Alpine PDX-5 - Amplifier - 4-channel plus Mono-power

5-channel car amplifier 75 watts RMS x 4 + 300 watts RMS x 1 at 4 or 2 ohms 150 watts RMS x 2 + 300 watts RMS x 1 in bridged mode (4-ohm stable in bridged mode) CEA-2006 compliant Stackable installation design with front-panel controls Variable high- and low-pass filters (30-400 Hz, 12 dB/octave) Quick-connect speaker connectors Class-D amplifier design MOSFET power and output stages Fuse rating: 30A x 2 4-gauge power and ground leads recommended wiring and hardware not included with amplifier Dimensions: (WHD) 10-3/16 x 2-1/2 x 8-3/8 In. warranty: 1 year


Alpine PDX1600 / PDX-1.600 / PDX-1.600 Mono Channel Digital Amplifier

Mono subwoofer amplifier 600 watts RMS x 1 at 4 ohms (600 watts RMS x 1 at 2 ohms) CEA-2006 compliant Stackable installation design with front-panel controls Variable low-pass filter (50-200 Hz, 24 dB/octave) Switchable subsonic filter (15 or 30 HZ) Quick-connect speaker connectors Preamp-level inputs and outputs Class-D amplifier design MOSFET power and output stages Fuse rating: 20A x 4 4-gauge amp wiring kit with 80-amp fuse recommended wiring and hardware not included with amplifier Dimensions: 10-3/16"W x 2-1/2"H x 8-1/2"D Warranty: 1 year


Alpine PDX-F4 4/3/2 Power Density Digital Amplifier

The new Alpine PDX Series amplifiers are completely re-engineered for performance, sound quality, and reliability. The PDX series are for the true car audio enthusiast, all from a compact size. Consider the bar raised. 4-Channel Power Density Digital Amplifier, 100 watts x 4 chan @ 2 ohms, Total RMS: 400 watts, Signal-to-Noise Ratio: 76dBA, Switch-Mode Digital Topology, CEA-2006 Compliant Amplifier


PA-1500 - Nakamichi 1200 Watt RMS Mono Digital Bass 1 Ohm Amplifier with Remote

* Circuitry: 100% POWER MOSFETs are used to drive the high efficiency switching power supply. And SEPP output stage are constructed by real Darlington transistors. * Pulse Width Modulated Power Supply: By using these high performance Power MOSFETs together with PHOTO ISOLATION technology on the PWM power supply, a very clean output signal is obtained with very low noise interference and low distortion. * Audio Stage Design: Excellent power supply with noise rejection ability in the voltage amplification stage gives good constant current driving the differential amplifier. Low negative feedback overall distortion and greatly lessens harmful high order harmonics. * Protection Circuitry: These Nakamichi amplifiers incorporate a 4-way Protection Circuitry will shut off the amplifier to prevent damage, if the unit is driven with a speaker output of less than 1 ohm, if there is a DC voltage appears on the speaker outputs, connected to an over-voltage battery or the amplifier gets overheated. The Protection LED indicator in front panel will turn RED if this occurs. However the unit will automatically reset after the amplifier cools down or can be manually reset by simply switching the unit off and on again. * Built In Crossovers & BASS EQ Controls: Each Nakamichi amplifier comes with built-in 18dB/oct slope, 50 Hz to 200 Hz continuously adjustable Two Way electronic crossover. There is an INT XOVER (internal crossover) selector switch to select High Pass, Low Pass, or Full Range (OFF) signal for internal power amplifications. There are also BASS EQ controls that can be adjusted at bass 45Hz, 0-18dB.